cairo_surface_t

cairo_surface_t — Base class for surfaces

Synopsis

#define             CAIRO_MIME_TYPE_JP2
#define             CAIRO_MIME_TYPE_JPEG
#define             CAIRO_MIME_TYPE_PNG
#define             CAIRO_MIME_TYPE_URI
typedef             cairo_surface_t;
enum                cairo_content_t;
cairo_surface_t *   cairo_surface_create_similar        (cairo_surface_t *other,
                                                         cairo_content_t content,
                                                         int width,
                                                         int height);
cairo_surface_t *   cairo_surface_create_for_rectangle  (cairo_surface_t *target,
                                                         double x,
                                                         double y,
                                                         double width,
                                                         double height);
cairo_surface_t *   cairo_surface_reference             (cairo_surface_t *surface);
void                cairo_surface_destroy               (cairo_surface_t *surface);
cairo_status_t      cairo_surface_status                (cairo_surface_t *surface);
void                cairo_surface_finish                (cairo_surface_t *surface);
void                cairo_surface_flush                 (cairo_surface_t *surface);
cairo_device_t *    cairo_surface_get_device            (cairo_surface_t *surface);
void                cairo_surface_get_font_options      (cairo_surface_t *surface,
                                                         cairo_font_options_t *options);
cairo_content_t     cairo_surface_get_content           (cairo_surface_t *surface);
void                cairo_surface_mark_dirty            (cairo_surface_t *surface);
void                cairo_surface_mark_dirty_rectangle  (cairo_surface_t *surface,
                                                         int x,
                                                         int y,
                                                         int width,
                                                         int height);
void                cairo_surface_set_device_offset     (cairo_surface_t *surface,
                                                         double x_offset,
                                                         double y_offset);
void                cairo_surface_get_device_offset     (cairo_surface_t *surface,
                                                         double *x_offset,
                                                         double *y_offset);
void                cairo_surface_set_fallback_resolution
                                                        (cairo_surface_t *surface,
                                                         double x_pixels_per_inch,
                                                         double y_pixels_per_inch);
void                cairo_surface_get_fallback_resolution
                                                        (cairo_surface_t *surface,
                                                         double *x_pixels_per_inch,
                                                         double *y_pixels_per_inch);
enum                cairo_surface_type_t;
cairo_surface_type_t  cairo_surface_get_type            (cairo_surface_t *surface);
unsigned int        cairo_surface_get_reference_count   (cairo_surface_t *surface);
cairo_status_t      cairo_surface_set_user_data         (cairo_surface_t *surface,
                                                         const cairo_user_data_key_t *key,
                                                         void *user_data,
                                                         cairo_destroy_func_t destroy);
void *              cairo_surface_get_user_data         (cairo_surface_t *surface,
                                                         const cairo_user_data_key_t *key);
void                cairo_surface_copy_page             (cairo_surface_t *surface);
void                cairo_surface_show_page             (cairo_surface_t *surface);
cairo_bool_t        cairo_surface_has_show_text_glyphs  (cairo_surface_t *surface);
cairo_status_t      cairo_surface_set_mime_data         (cairo_surface_t *surface,
                                                         const char *mime_type,
                                                         unsigned char *data,
                                                         unsigned long  length,
                                                         cairo_destroy_func_t destroy,
                                                         void *closure);
void                cairo_surface_get_mime_data         (cairo_surface_t *surface,
                                                         const char *mime_type,
                                                         unsigned char **data,
                                                         unsigned long *length);

Description

cairo_surface_t is the abstract type representing all different drawing targets that cairo can render to. The actual drawings are performed using a cairo context.

A cairo surface is created by using backend-specific constructors, typically of the form cairo_backend_surface_create().

Most surface types allow accessing the surface without using Cairo functions. If you do this, keep in mind that it is mandatory that you call cairo_surface_flush() before reading from or writing to the surface and that you must use cairo_surface_mark_dirty() after modifying it.

Example 1. Directly modifying an image surface

void
modify_image_surface (cairo_surface_t *surface)
{
  unsigned char *data;
  int width, height, stride;

  // flush to ensure all writing to the image was done
  cairo_surface_flush (surface);

  // modify the image
  data = cairo_image_surface_get_data (surface);
  width = cairo_image_surface_get_width (surface);
  height = cairo_image_surface_get_height (surface);
  stride = cairo_image_surface_get_stride (surface);
  modify_image_data (data, width, height, stride);

  // mark the image dirty so Cairo clears its caches.
  cairo_surface_mark_dirty (surface);
}


Note that for other surface types it might be necessary to acquire the surface's device first. See cairo_device_acquire() for a discussion of devices.

Details

CAIRO_MIME_TYPE_JP2

#define CAIRO_MIME_TYPE_JP2 "image/jp2"

The Joint Photographic Experts Group (JPEG) 2000 image coding standard (ISO/IEC 15444-1).

Since: 1.10


CAIRO_MIME_TYPE_JPEG

#define CAIRO_MIME_TYPE_JPEG "image/jpeg"

The Joint Photographic Experts Group (JPEG) image coding standard (ISO/IEC 10918-1).

Since: 1.10


CAIRO_MIME_TYPE_PNG

#define CAIRO_MIME_TYPE_PNG "image/png"

The Portable Network Graphics image file format (ISO/IEC 15948).

Since: 1.10


CAIRO_MIME_TYPE_URI

#define CAIRO_MIME_TYPE_URI "text/x-uri"

URI for an image file (unofficial MIME type).

Since: 1.10


cairo_surface_t

typedef struct _cairo_surface cairo_surface_t;

A cairo_surface_t represents an image, either as the destination of a drawing operation or as source when drawing onto another surface. To draw to a cairo_surface_t, create a cairo context with the surface as the target, using cairo_create().

There are different subtypes of cairo_surface_t for different drawing backends; for example, cairo_image_surface_create() creates a bitmap image in memory. The type of a surface can be queried with cairo_surface_get_type().

The initial contents of a surface after creation depend upon the manner of its creation. If cairo creates the surface and backing storage for the user, it will be initially cleared; for example, cairo_image_surface_create() and cairo_surface_create_similar(). Alternatively, if the user passes in a reference to some backing storage and asks cairo to wrap that in a cairo_surface_t, then the contents are not modified; for example, cairo_image_surface_create_for_data() and cairo_xlib_surface_create().

Memory management of cairo_surface_t is done with cairo_surface_reference() and cairo_surface_destroy().


enum cairo_content_t

typedef enum _cairo_content {
    CAIRO_CONTENT_COLOR		= 0x1000,
    CAIRO_CONTENT_ALPHA		= 0x2000,
    CAIRO_CONTENT_COLOR_ALPHA = 0x3000
} cairo_content_t;

cairo_content_t is used to describe the content that a surface will contain, whether color information, alpha information (translucence vs. opacity), or both.

Note: The large values here are designed to keep cairo_content_t values distinct from cairo_format_t values so that the implementation can detect the error if users confuse the two types.

CAIRO_CONTENT_COLOR

The surface will hold color content only.

CAIRO_CONTENT_ALPHA

The surface will hold alpha content only.

CAIRO_CONTENT_COLOR_ALPHA

The surface will hold color and alpha content.

cairo_surface_create_similar ()

cairo_surface_t *   cairo_surface_create_similar        (cairo_surface_t *other,
                                                         cairo_content_t content,
                                                         int width,
                                                         int height);

Create a new surface that is as compatible as possible with an existing surface. For example the new surface will have the same fallback resolution and font options as other. Generally, the new surface will also use the same backend as other, unless that is not possible for some reason. The type of the returned surface may be examined with cairo_surface_get_type().

Initially the surface contents are all 0 (transparent if contents have transparency, black otherwise.)

other :

an existing surface used to select the backend of the new surface

content :

the content for the new surface

width :

width of the new surface, (in device-space units)

height :

height of the new surface (in device-space units)

Returns :

a pointer to the newly allocated surface. The caller owns the surface and should call cairo_surface_destroy() when done with it. This function always returns a valid pointer, but it will return a pointer to a "nil" surface if other is already in an error state or any other error occurs.

cairo_surface_create_for_rectangle ()

cairo_surface_t *   cairo_surface_create_for_rectangle  (cairo_surface_t *target,
                                                         double x,
                                                         double y,
                                                         double width,
                                                         double height);

Create a new surface that is a rectangle within the target surface. All operations drawn to this surface are then clipped and translated onto the target surface. Nothing drawn via this sub-surface outside of its bounds is drawn onto the target surface, making this a useful method for passing constrained child surfaces to library routines that draw directly onto the parent surface, i.e. with no further backend allocations, double buffering or copies.

Note

The semantics of subsurfaces have not been finalized yet unless the rectangle is in full device units, is contained within the extents of the target surface, and the target or subsurface's device transforms are not changed.

target :

an existing surface for which the sub-surface will point to

x :

the x-origin of the sub-surface from the top-left of the target surface (in device-space units)

y :

the y-origin of the sub-surface from the top-left of the target surface (in device-space units)

width :

width of the sub-surface (in device-space units)

height :

height of the sub-surface (in device-space units)

Returns :

a pointer to the newly allocated surface. The caller owns the surface and should call cairo_surface_destroy() when done with it. This function always returns a valid pointer, but it will return a pointer to a "nil" surface if other is already in an error state or any other error occurs.

Since 1.10


cairo_surface_reference ()

cairo_surface_t *   cairo_surface_reference             (cairo_surface_t *surface);

Increases the reference count on surface by one. This prevents surface from being destroyed until a matching call to cairo_surface_destroy() is made.

The number of references to a cairo_surface_t can be get using cairo_surface_get_reference_count().

surface :

a cairo_surface_t

Returns :

the referenced cairo_surface_t.

cairo_surface_destroy ()

void                cairo_surface_destroy               (cairo_surface_t *surface);

Decreases the reference count on surface by one. If the result is zero, then surface and all associated resources are freed. See cairo_surface_reference().

surface :

a cairo_surface_t

cairo_surface_status ()

cairo_status_t      cairo_surface_status                (cairo_surface_t *surface);

Checks whether an error has previously occurred for this surface.


cairo_surface_finish ()

void                cairo_surface_finish                (cairo_surface_t *surface);

This function finishes the surface and drops all references to external resources. For example, for the Xlib backend it means that cairo will no longer access the drawable, which can be freed. After calling cairo_surface_finish() the only valid operations on a surface are getting and setting user, referencing and destroying, and flushing and finishing it. Further drawing to the surface will not affect the surface but will instead trigger a CAIRO_STATUS_SURFACE_FINISHED error.

When the last call to cairo_surface_destroy() decreases the reference count to zero, cairo will call cairo_surface_finish() if it hasn't been called already, before freeing the resources associated with the surface.

surface :

the cairo_surface_t to finish

cairo_surface_flush ()

void                cairo_surface_flush                 (cairo_surface_t *surface);

Do any pending drawing for the surface and also restore any temporary modifications cairo has made to the surface's state. This function must be called before switching from drawing on the surface with cairo to drawing on it directly with native APIs. If the surface doesn't support direct access, then this function does nothing.

surface :

a cairo_surface_t

cairo_surface_get_device ()

cairo_device_t *    cairo_surface_get_device            (cairo_surface_t *surface);

This function returns the device for a surface. See cairo_device_t.

surface :

a cairo_surface_t

Returns :

The device for surface or NULL if the surface does not have an associated device.

Since 1.10


cairo_surface_get_font_options ()

void                cairo_surface_get_font_options      (cairo_surface_t *surface,
                                                         cairo_font_options_t *options);

Retrieves the default font rendering options for the surface. This allows display surfaces to report the correct subpixel order for rendering on them, print surfaces to disable hinting of metrics and so forth. The result can then be used with cairo_scaled_font_create().

surface :

a cairo_surface_t

options :

a cairo_font_options_t object into which to store the retrieved options. All existing values are overwritten

cairo_surface_get_content ()

cairo_content_t     cairo_surface_get_content           (cairo_surface_t *surface);

This function returns the content type of surface which indicates whether the surface contains color and/or alpha information. See cairo_content_t.

surface :

a cairo_surface_t

Returns :

The content type of surface.

Since 1.2


cairo_surface_mark_dirty ()

void                cairo_surface_mark_dirty            (cairo_surface_t *surface);

Tells cairo that drawing has been done to surface using means other than cairo, and that cairo should reread any cached areas. Note that you must call cairo_surface_flush() before doing such drawing.

surface :

a cairo_surface_t

cairo_surface_mark_dirty_rectangle ()

void                cairo_surface_mark_dirty_rectangle  (cairo_surface_t *surface,
                                                         int x,
                                                         int y,
                                                         int width,
                                                         int height);

Like cairo_surface_mark_dirty(), but drawing has been done only to the specified rectangle, so that cairo can retain cached contents for other parts of the surface.

Any cached clip set on the surface will be reset by this function, to make sure that future cairo calls have the clip set that they expect.

surface :

a cairo_surface_t

x :

X coordinate of dirty rectangle

y :

Y coordinate of dirty rectangle

width :

width of dirty rectangle

height :

height of dirty rectangle

cairo_surface_set_device_offset ()

void                cairo_surface_set_device_offset     (cairo_surface_t *surface,
                                                         double x_offset,
                                                         double y_offset);

Sets an offset that is added to the device coordinates determined by the CTM when drawing to surface. One use case for this function is when we want to create a cairo_surface_t that redirects drawing for a portion of an onscreen surface to an offscreen surface in a way that is completely invisible to the user of the cairo API. Setting a transformation via cairo_translate() isn't sufficient to do this, since functions like cairo_device_to_user() will expose the hidden offset.

Note that the offset affects drawing to the surface as well as using the surface in a source pattern.

surface :

a cairo_surface_t

x_offset :

the offset in the X direction, in device units

y_offset :

the offset in the Y direction, in device units

cairo_surface_get_device_offset ()

void                cairo_surface_get_device_offset     (cairo_surface_t *surface,
                                                         double *x_offset,
                                                         double *y_offset);

This function returns the previous device offset set by cairo_surface_set_device_offset().

surface :

a cairo_surface_t

x_offset :

the offset in the X direction, in device units

y_offset :

the offset in the Y direction, in device units

Since 1.2


cairo_surface_set_fallback_resolution ()

void                cairo_surface_set_fallback_resolution
                                                        (cairo_surface_t *surface,
                                                         double x_pixels_per_inch,
                                                         double y_pixels_per_inch);

Set the horizontal and vertical resolution for image fallbacks.

When certain operations aren't supported natively by a backend, cairo will fallback by rendering operations to an image and then overlaying that image onto the output. For backends that are natively vector-oriented, this function can be used to set the resolution used for these image fallbacks, (larger values will result in more detailed images, but also larger file sizes).

Some examples of natively vector-oriented backends are the ps, pdf, and svg backends.

For backends that are natively raster-oriented, image fallbacks are still possible, but they are always performed at the native device resolution. So this function has no effect on those backends.

Note: The fallback resolution only takes effect at the time of completing a page (with cairo_show_page() or cairo_copy_page()) so there is currently no way to have more than one fallback resolution in effect on a single page.

The default fallback resoultion is 300 pixels per inch in both dimensions.

surface :

a cairo_surface_t

x_pixels_per_inch :

horizontal setting for pixels per inch

y_pixels_per_inch :

vertical setting for pixels per inch

Since 1.2


cairo_surface_get_fallback_resolution ()

void                cairo_surface_get_fallback_resolution
                                                        (cairo_surface_t *surface,
                                                         double *x_pixels_per_inch,
                                                         double *y_pixels_per_inch);

This function returns the previous fallback resolution set by cairo_surface_set_fallback_resolution(), or default fallback resolution if never set.

surface :

a cairo_surface_t

x_pixels_per_inch :

horizontal pixels per inch

y_pixels_per_inch :

vertical pixels per inch

Since 1.8


enum cairo_surface_type_t

typedef enum _cairo_surface_type {
    CAIRO_SURFACE_TYPE_IMAGE,
    CAIRO_SURFACE_TYPE_PDF,
    CAIRO_SURFACE_TYPE_PS,
    CAIRO_SURFACE_TYPE_XLIB,
    CAIRO_SURFACE_TYPE_XCB,
    CAIRO_SURFACE_TYPE_GLITZ,
    CAIRO_SURFACE_TYPE_QUARTZ,
    CAIRO_SURFACE_TYPE_WIN32,
    CAIRO_SURFACE_TYPE_BEOS,
    CAIRO_SURFACE_TYPE_DIRECTFB,
    CAIRO_SURFACE_TYPE_SVG,
    CAIRO_SURFACE_TYPE_OS2,
    CAIRO_SURFACE_TYPE_WIN32_PRINTING,
    CAIRO_SURFACE_TYPE_QUARTZ_IMAGE,
    CAIRO_SURFACE_TYPE_SCRIPT,
    CAIRO_SURFACE_TYPE_QT,
    CAIRO_SURFACE_TYPE_RECORDING,
    CAIRO_SURFACE_TYPE_VG,
    CAIRO_SURFACE_TYPE_GL,
    CAIRO_SURFACE_TYPE_DRM,
    CAIRO_SURFACE_TYPE_TEE,
    CAIRO_SURFACE_TYPE_XML,
    CAIRO_SURFACE_TYPE_SKIA,
    CAIRO_SURFACE_TYPE_SUBSURFACE
} cairo_surface_type_t;

cairo_surface_type_t is used to describe the type of a given surface. The surface types are also known as "backends" or "surface backends" within cairo.

The type of a surface is determined by the function used to create it, which will generally be of the form cairo_type_surface_create(), (though see cairo_surface_create_similar() as well).

The surface type can be queried with cairo_surface_get_type()

The various cairo_surface_t functions can be used with surfaces of any type, but some backends also provide type-specific functions that must only be called with a surface of the appropriate type. These functions have names that begin with cairo_type_surface such as cairo_image_surface_get_width().

The behavior of calling a type-specific function with a surface of the wrong type is undefined.

New entries may be added in future versions.

CAIRO_SURFACE_TYPE_IMAGE

The surface is of type image

CAIRO_SURFACE_TYPE_PDF

The surface is of type pdf

CAIRO_SURFACE_TYPE_PS

The surface is of type ps

CAIRO_SURFACE_TYPE_XLIB

The surface is of type xlib

CAIRO_SURFACE_TYPE_XCB

The surface is of type xcb

CAIRO_SURFACE_TYPE_GLITZ

The surface is of type glitz

CAIRO_SURFACE_TYPE_QUARTZ

The surface is of type quartz

CAIRO_SURFACE_TYPE_WIN32

The surface is of type win32

CAIRO_SURFACE_TYPE_BEOS

The surface is of type beos

CAIRO_SURFACE_TYPE_DIRECTFB

The surface is of type directfb

CAIRO_SURFACE_TYPE_SVG

The surface is of type svg

CAIRO_SURFACE_TYPE_OS2

The surface is of type os2

CAIRO_SURFACE_TYPE_WIN32_PRINTING

The surface is a win32 printing surface

CAIRO_SURFACE_TYPE_QUARTZ_IMAGE

The surface is of type quartz_image

CAIRO_SURFACE_TYPE_SCRIPT

The surface is of type script, since 1.10

CAIRO_SURFACE_TYPE_QT

The surface is of type Qt, since 1.10

CAIRO_SURFACE_TYPE_RECORDING

The surface is of type recording, since 1.10

CAIRO_SURFACE_TYPE_VG

The surface is a OpenVG surface, since 1.10

CAIRO_SURFACE_TYPE_GL

The surface is of type OpenGL, since 1.10

CAIRO_SURFACE_TYPE_DRM

The surface is of type Direct Render Manager, since 1.10

CAIRO_SURFACE_TYPE_TEE

The surface is of type 'tee' (a multiplexing surface), since 1.10

CAIRO_SURFACE_TYPE_XML

The surface is of type XML (for debugging), since 1.10

CAIRO_SURFACE_TYPE_SKIA

The surface is of type Skia, since 1.10

CAIRO_SURFACE_TYPE_SUBSURFACE

The surface is a subsurface created with cairo_surface_create_for_rectangle(), since 1.10

Since 1.2


cairo_surface_get_type ()

cairo_surface_type_t  cairo_surface_get_type            (cairo_surface_t *surface);

This function returns the type of the backend used to create a surface. See cairo_surface_type_t for available types.

surface :

a cairo_surface_t

Returns :

The type of surface.

Since 1.2


cairo_surface_get_reference_count ()

unsigned int        cairo_surface_get_reference_count   (cairo_surface_t *surface);

Returns the current reference count of surface.

surface :

a cairo_surface_t

Returns :

the current reference count of surface. If the object is a nil object, 0 will be returned.

Since 1.4


cairo_surface_set_user_data ()

cairo_status_t      cairo_surface_set_user_data         (cairo_surface_t *surface,
                                                         const cairo_user_data_key_t *key,
                                                         void *user_data,
                                                         cairo_destroy_func_t destroy);

Attach user data to surface. To remove user data from a surface, call this function with the key that was used to set it and NULL for data.

surface :

a cairo_surface_t

key :

the address of a cairo_user_data_key_t to attach the user data to

user_data :

the user data to attach to the surface

destroy :

a cairo_destroy_func_t which will be called when the surface is destroyed or when new user data is attached using the same key.

Returns :

CAIRO_STATUS_SUCCESS or CAIRO_STATUS_NO_MEMORY if a slot could not be allocated for the user data.

cairo_surface_get_user_data ()

void *              cairo_surface_get_user_data         (cairo_surface_t *surface,
                                                         const cairo_user_data_key_t *key);

Return user data previously attached to surface using the specified key. If no user data has been attached with the given key this function returns NULL.

surface :

a cairo_surface_t

key :

the address of the cairo_user_data_key_t the user data was attached to

Returns :

the user data previously attached or NULL.

cairo_surface_copy_page ()

void                cairo_surface_copy_page             (cairo_surface_t *surface);

Emits the current page for backends that support multiple pages, but doesn't clear it, so that the contents of the current page will be retained for the next page. Use cairo_surface_show_page() if you want to get an empty page after the emission.

There is a convenience function for this that takes a cairo_t, namely cairo_copy_page().

surface :

a cairo_surface_t

Since 1.6


cairo_surface_show_page ()

void                cairo_surface_show_page             (cairo_surface_t *surface);

Emits and clears the current page for backends that support multiple pages. Use cairo_surface_copy_page() if you don't want to clear the page.

There is a convenience function for this that takes a cairo_t, namely cairo_show_page().

surface :

a cairo_Surface_t

Since 1.6


cairo_surface_has_show_text_glyphs ()

cairo_bool_t        cairo_surface_has_show_text_glyphs  (cairo_surface_t *surface);

Returns whether the surface supports sophisticated cairo_show_text_glyphs() operations. That is, whether it actually uses the provided text and cluster data to a cairo_show_text_glyphs() call.

Note: Even if this function returns FALSE, a cairo_show_text_glyphs() operation targeted at surface will still succeed. It just will act like a cairo_show_glyphs() operation. Users can use this function to avoid computing UTF-8 text and cluster mapping if the target surface does not use it.

surface :

a cairo_surface_t

Returns :

TRUE if surface supports cairo_show_text_glyphs(), FALSE otherwise

Since 1.8


cairo_surface_set_mime_data ()

cairo_status_t      cairo_surface_set_mime_data         (cairo_surface_t *surface,
                                                         const char *mime_type,
                                                         unsigned char *data,
                                                         unsigned long  length,
                                                         cairo_destroy_func_t destroy,
                                                         void *closure);

Attach an image in the format mime_type to surface. To remove the data from a surface, call this function with same mime type and NULL for data.

The attached image (or filename) data can later be used by backends which support it (currently: PDF, PS, SVG and Win32 Printing surfaces) to emit this data instead of making a snapshot of the surface. This approach tends to be faster and requires less memory and disk space.

The recognized MIME types are the following: CAIRO_MIME_TYPE_JPEG, CAIRO_MIME_TYPE_PNG, CAIRO_MIME_TYPE_JP2, CAIRO_MIME_TYPE_URI.

See corresponding backend surface docs for details about which MIME types it can handle. Caution: the associated MIME data will be discarded if you draw on the surface afterwards. Use this function with care.

surface :

a cairo_surface_t

mime_type :

the MIME type of the image data

data :

the image data to attach to the surface

length :

the length of the image data

destroy :

a cairo_destroy_func_t which will be called when the surface is destroyed or when new image data is attached using the same mime type.

closure :

the data to be passed to the destroy notifier

Returns :

CAIRO_STATUS_SUCCESS or CAIRO_STATUS_NO_MEMORY if a slot could not be allocated for the user data.

Since 1.10


cairo_surface_get_mime_data ()

void                cairo_surface_get_mime_data         (cairo_surface_t *surface,
                                                         const char *mime_type,
                                                         unsigned char **data,
                                                         unsigned long *length);

Return mime data previously attached to surface using the specified mime type. If no data has been attached with the given mime type, data is set NULL.

surface :

a cairo_surface_t

mime_type :

the mime type of the image data

data :

the image data to attached to the surface

length :

the length of the image data

Since 1.10

See Also

cairo_t, cairo_pattern_t